Karolo ea Belt Vulcanizing Press ZLJ Series Mofuta oa mosebetsi o boima

Karolo ea Belt Vulcanizing Press ZLJ Series Mofuta oa mosebetsi o boima

Tlhaloso e Khutšoanyane:

Mofuta o mocha oa Vulcanizing Press, mofuta o mong oa boima bo boima ba vulcanizer, sebelisa likarolo tse ncha tsa moralo, ho kenyeletsoa le mokotla oa khatello, mekoallo e haulang e nang le maemo a futhumatsang le lebokose la taolo


Product Qaqileng

Lihlahisoa tsa Product

Tšebeliso Lebanta la masela 100 psi (7 kg / cm sq.)
Lebanta la tšepe 200 psi (14 kg / cm sq.)
Boholo. Belt bophara Ho tloha ho 650mm ho isa ho 3000mm
Khatello ea System Mokotla oa khatello ea metsi (hape o khona ho sebelisa khatello ea moea.). Tobetsa bakeng sa 100 PSI, 200 PSI jj, khatello ea bokaholimo bakeng sa masela a masela le masela a tšepe, ho fihlela 1.8Mpa.
Vulcanizing Mocheso Vulcanizing mocheso: 145: (fetolehang 0 ~ 200 ℃)
Sistimi e Pholisang Pompo ea khatello bakeng sa ho futhumatsa, nako ea ho phomola ke metsotso e 5 feela (ho phomola ho tloha ho 145 ho isa ho 75 ℃).
Lisebelisoa tsa ho futhumatsa Platen  Leeme angle 22 ℃ kapa 17 ℃, 20 ℃, khutlonne le likhato tse ling bakeng sa dikgetho.
Palo ea li-volts 220V, 380V, 400V, 415V, 440V, 480V, 660V, kapa ho latela kopo ea moreki.

 

Likaroloana:

1. Li-unit tsa 200 psi (14 kg / cm sq.) Li loketse ho qhotsa lebanta le tsamaisang mohala oa tšepe.

2. E amohela likopano tse phahameng tsa tšepe ea tšepe le linate.

(Bakeng sa litlhoko tse tlase tsa khatello, hape u be le lisebelisoa tse bobebe tsa aluminium)

Sistimi e ntlafalitsoeng ea thibelo e bonolo ebile e bonolo ho e sebelisa, ho itšireletsa likotsing tse ka 'nang tsa fella ka hore bolt e hlolehe.

Li-platens tsa 3.Lightweight aluminium li sebelisa sistimi e ncha ea ho futhumatsa kahare ho li-platen

4. Tloaelo: Ho futhumatsa likarolo tsa platen angle le litokisetso tse ngata tsa platen le tsona lia fumaneha ho latela kopo ea moreki.

5.Sistimi e ncha ea ho hokela motlakase: Moralo oa khale le socket ke ea polaka e bataletseng, lithakhisa tsa polaka li bonolo ho robeha. Moralo oa rona o mocha oa polaka o na le mahlale ebile oa utloahala. E sebetsa habonolo, e bolokehile ebile ea tšepahala.

6.Khatello ea tsamaiso ea mokotla:

E khona ho tsoela pele ka metsi le moea, ka nako e le 'ngoe e sa bōptjoe, ntle le tšepe, boima bo bobebe le khatello ea liteko e tsoang fekthering e fihla ho 2.5MPa (mokotla oa khale oa khatello o entsoeng ka tšepe le li-bolts, boima bo boima.)

7.Khatello:

Pompo ea khatello e ikemetseng e nang le khatello ea khatello, e lumella ts'ebeliso e bonolo ea khatello ho fihlela 200PSI bakeng sa lebanta la tšepe. Ts'ebetso eohle e tla ba mofuta oa likoloi tse felletseng. Kamora ho sebelisa sistimi e ncha ea ho futhumatsa ka ho futhumatsa platen, e ka fola ho tloha ho 145 ℃ ho isa ho 75 ℃ nakong ea metsotso e 5.

Pompo ea ho futhumatsa, ha e sebetsa le moea o hatellang, khatello ea moea, pompo e joalo ea ho futhumatsa e ka sebelisoa bakeng sa ho pholisa. (Ka kopo elelloa hore, haeba ho na le litlhoko tse ikhethileng tsa pompo e sebetsang ea pompo, ka kopo re tsebise pele ho odara, gagamalo e tloaelehileng ke karolo ea 220V e le 'ngoe

 

Kopo:
Karolo ea Vulcanizing Press ZLJ Series li se ka sebelisoa bakeng sa ho kopanya likarolo tsena: metallurgy, indasteri ea lik'hemik'hale, meepo ea tšepe, setsi sa motlakase, likou, likoung. Bokaholimo ba jointing bo boreleli, 'me e ka fokotsa khorofo le ho etsa hore lebanta le tsamaisang thepa le sebetse nako e telele.

 

Recommended sebetsa di-parameter:

Pheko ea khatello: 1.0-2.0 mpa;
Ho folisa mocheso: 145 ° C;
Phapang ea mocheso oa Vulcanization poleiti ea holim'a metsi: +/- 2 ° C;
Nako ea ho futhumatsa (ho tloha mocheso oa kamore ho isa ho 145 ° C) ha e fete metsotso e 30;
Voltage e amanang: 380V, 50 Hz, AC, kapa ho latela kopo ea moreki;
Matla a tsoang: 36 KW;
Boemo ba Phetoho ea Mocheso: 0 ~ 200 ° C;
Nako ea Phetoho ea Nako: 0 ~ 99 mins


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa oa hau mona ebe u o romella ho rona